EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is often a very successful photo voltaic controller designed for off-grid solar systems. Based upon multiphase synchronous rectification know-how, it makes certain optimized Power conversion and process stability for a variety of photovoltaic (PV) applications.

Essential Features in the EPEVER Tracer AN Collection Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technology for outstanding solar Vitality harvesting. Vital options consist of:

Multiphase Synchronous Rectification (MSR) for improved Electrical power conversion.
Superior MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for Improved battery daily life.
LCD Screen with genuine-time knowledge checking.
Various Load Handle Modes together with manual and timer.
Thorough Digital Protections from overcharging, around-discharging, small circuits, and reverse polarity.
Action-by-Stage Guidebook to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make sure all parts are bundled: Tracer AN unit, temperature sensor, conversation cables, and user manual.
Validate the model amount and voltage scores match your photo voltaic panel and battery technical specs.
2. Mounting the Charge Controller
Pick a very well-ventilated, dry locale near to the battery bank.
Protected the Tracer AN controller using the provided mounting brackets.
Retain appropriate clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Usually stick to suitable basic safety protocols and ensure the method is run off before connecting factors.

Step one: Hook up the battery terminals for the charge controller (favourable to favourable, destructive to negative).
Step two: Hook up the solar panel array to the PV enter terminals.
Phase 3: Hook up the load terminals if utilizing a immediate load link.
Phase 4: Click Here Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery 1st.
Use the Liquid crystal display Show to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light-weight Management.
five. Monitoring and Details Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 communication port working with software such as Photo voltaic Station Personal computer.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electric power Output

Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Around-Voltage Safety

Confirm the photo voltaic array’s voltage rating.
Change system parameters if required.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification engineering makes certain:

Better Efficiency: Minimized Power losses all through conversion.
Enhanced Reliability: Stable effectiveness under variable loads.
For a longer time Battery Lifetime: Dependable and accurate charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is definitely an Extraordinary option for optimizing solar energy era and increasing battery lifestyle. By pursuing the above mentioned setup information, customers can guarantee most efficiency and program longevity.