EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Solar Demand Controller is really a hugely economical solar controller designed for off-grid solar techniques. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) programs.

Crucial Characteristics with the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technologies for superior solar Electricity harvesting. Vital attributes consist of:

Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Show with actual-time information monitoring.
Numerous Load Manage Modes including manual and timer.
Extensive Digital Protections in opposition to overcharging, above-discharging, quick circuits, and reverse polarity.
Stage-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Planning the Controller
Be certain all factors are incorporated: Tracer AN device, temperature sensor, communication cables, and user manual.
Validate the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery bank.
Secure the Tracer AN controller using the presented mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually follow proper protection protocols and ensure the method is powered off in advance of connecting parts.

Stage one: Link the battery terminals for the demand controller (positive to positive, adverse to damaging).
Action two: Hook up the photo voltaic panel array to your PV input terminals.
Phase 3: Hook up the load terminals if employing a immediate load link.
Phase 4: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Settings
Electricity over the controller by connecting the battery initial.
Utilize the LCD Exhibit to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, gentle Manage.
five. Monitoring and Info Logging
The Tracer AN Sequence supports true-time checking using the MT50 distant meter.
Knowledge is often logged by way of the RS485 interaction port employing computer software such as Photo voltaic Station Computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Issue visit here one: No Power Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection

Confirm the solar array’s voltage ranking.
Modify procedure parameters if required.
Difficulty 3: No Battery Charging

Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:

Increased Performance: Decreased Electricity losses throughout conversion.
Increased Reliability: Steady general performance below variable masses.
Longer Battery Existence: Dependable and accurate charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is undoubtedly an exceptional option for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guideline, customers can ensure most efficiency and technique longevity.